Once the Coiled Tubing has been prepared using the Reamer System, the Roll-On Connector is installed into the open end of the Coiled Tubing and a standard crimping tool is used to form the tubing around the profiles on the Connector. The grooved profiles will provide a connection that can withstand linear pulls but will not prevent rotational movement created by torque whilst the o-ring seals provide a pressure retaining barrier between the Coiled Tubing and the created annulus.
Slim running OD
Simple to install using standard crimping tool
Dual o-ring seal
Available in a range of sizes to suit industry standard Coiled Tubing diameters and BHA’s
Simple, robust design ensuring ease of operation for the end user
Selected components QPQ treated
Hexagonal flats for safe make-up & break-out
Connection options to suit customer requirements
Corrosion resistant materials
To provide a simple, but effective method of connecting the Coiled Tubing to the BHA for no-torque applications
Used in smaller tubing ID’s to maintain a slim running profile along the BHA
To provide a means of joining two lengths of Coiled Tubing together
Optimized Table
| PN |
CT Size (in) |
OD (in) |
Thread type |
| 104-100 |
1 |
25.4 |
*pin |
| 104-125 |
1.25 |
31.75 |
*pin |
| 104-150 |
1.5 |
38.1 |
1 AMMT pin |
| 104-175 |
1.75 |
44.5 |
1 AMMT pin |
| 104-200 |
2 |
50.8 |
1-1/2 AMMT pin |
